Ship worldwide

Göldo Tunamatic 3-points vario brücke satin schwarz

In addition, on this classic Tune-o-Matic bridge, the 6 screws for adjusting the octave intonation are anchored in the housing on the side opposite the screw heads. This means that the string saddles rest on four points - the 2 screw ends and the 2 side "shoulders". Which in turn means that tipping and rattling are pre-programmed.

Göldo have now integrated the great parts of this original Tune-o-matic bridge into a new, innovative bridge unit and cut the octave screws to length in such a way that they just do not reach into the opposite edge of the housing, so that each string saddle only rests on 3 points - which gave this bridge its name. The result is an optimally solid construction that offers the best basis for a firmly articulated, sustain-rich and dynamic sound because no component tilts or rattles and wastes vibration energy. By the way, the string riders themselves are made of stainless steel - great for the sound and best against string breakage.

Apart from the fact that this bridge is virtually the original ancestor of the Gibson Tune-o-matic, have equipped it with a distinctive Göldo feature visible only from the bottom side: one of the two 4mm holes for the height adjustment screws is designed as a longitudinal hole, so that this bridge adapts to various spacings and can replace all Tune-o-matic bridges on the market.

The octave intonation is adjusted with slotted screws which, due to their construction, point towards the tailpiece or tremolo.

 Distance between bolts: from 72.3mm to 74.0mm; diameter of bolts: classic 4mm.