NitorLACK Fender Charcoal Frost nitrocellulose 400ml spray

Nitrocellulose CHARCOAL FROST METALLIC Based on original Fender and Gibson colors. To develop guitar colors, have relied on original samples from the 1950s and 1960s. After amazing work and exhaustive study by laboratory and technical department, some Guitar colors that faithfully recreate the tones of vintage Fender and Gibson guitars for paint electric guitar. During those years until the present, it should be borne in mind that the Colors of vintage guitars have varied greatly over the years due to the aging of the nitrocellulose lacquer and modifications in the brand’s own colors. Therefore two guitars finished in 1960 with fender card colors today can be totally different between them or with respect to a more current guitar.

Paint your guitar easily with spray. So that the painting equipment is not an impediment to painting your guitar, have developed all guitar colors in nitrocellulose spray format. You can achieve a professional finish with entire range of products, from backgrounds and the entire range of colors, to gloss and matte nitrocellulose lacquer. How much product do I need to buy guitar paint spray? It will depend a lot on the type of wood and the amount of product that is applied for each coat and the desired finish, mirror effect or “open pore”. But in general for paint a guitar with a medium wood pore, for an electric guitar neck: two spray nitrocellulose finish (gloss or matt), for an electric guitar body: one spray nitrocellulose primer and three nitrocellulose finishing spray (gloss or matte), classic or acoustic: 1 primer spray nitrocellulose and 4 or 5 nitrocellulose finishing sprays (gloss or matte) and Ukulele: two nitrocellulose finishing sprays. (gloss or matt). If you want to apply a color, between a nitrocellulose base and a nitrocellulose finish, you should add 1 or 2 spray of the desired guitar color. Spray application tips Shake vigorously for two to five minutes before applying. It is recommended to apply the spray in thin layers and with an ambient humidity that is as low as possible. Apply with a uniform movement and with a distance of approximately 20 cm. It is important to apply a primer and sand with 400 before applying the spray to achieve a uniform surface before coloring or finishing. Sand between coats and allow to dry for 12 to 24 hours between coats. Apply in ventilated areas. You can buy guitar sandpaper in our store.