Shipping to any EU Country and ship Worldwide

Schaller Floyd Rose tremolo R3 Nut 42mm block

Special studs with additional inserts are used to mount the tremolo onto the instrument. The inserts have a fine thread. We also supply studs with threads which enable the studs to be specify screwed into the wood body of the instrument directly, i.e. without inserts.

The dimensions of our Schaller Tremolo are exactly the same as the dimensions of both the Floyd Rose Tremolo and our LockMeister Tremolo. You can easily replace your Floyd Rose Tremolo with a Schaller Tremolo. This also applies to all replacement parts.

The back of the string lock inserts is numbered with 0,1 and 2.

0 is for the D and G strings, 1 is for the A and B strings and the number 2 is for both E strings. 

You can simply pull out the knife edges with a pliers and push the new ones into the insertion slot.

Technical information

Distance height adjustment screws 74,3mm, size press-in bushing 10mm, string spacing E-e 53,5mm, slideway intonation 8,5mm, weight 439g with block length 37mm, maximum string gauge 80.

The radius of the saddles is 12"; if you put the shim under the saddles away you get 16".

Tremolo block with 3 fixing screws at a distance of 17mm.

Scope of supply

1 locking nut complete with 2 pairs of mounting screws, 1 string retainer with mounting screws 2.2 x 16 mm, 1 tremolo claw complete with mounting screws 4.2 x 45 mm and 3 tremolo springs, 2 mounting studs M7x0,5 with 2 threaded bushings diameter 10mm, 3 Allen keys (2.0/2.5/3.0mm).