Kernom Ridge Overdrive with MIDI control

Kernom Ridge Overdrive with MIDI control. Kernom invented a new approach to analog circuit called augmented analog. It allows to control the physical behavior a nonlinear circuit for an infinite number of ways to clip an analog signal and unmatched harmonic content. It is the link that was missing between the great sounds of legendary recordings andthe needs of modern musicians. This first technology developed by Kernom is called analog orphing core. This patented innovation allows musicians to control in real time the behavior of an overdriven electronic circuit, mixing the natural warmth and amazing sound of analog clipping, with the precision and flexibility of digital control. KERNOM is a company building technologically advanced and innovative electronic products for musicians. The brand was founded in 2020 by a team of musicians and engineers with a deep passion for sound and an extensive background in high end audio, acquired through 30+ years of combined experience in sound engineering and working at Devialet on the development and launch of the iconic Phantom speaker.

€271.34 Includes 21% VAT

301.50 Includes 27% VAT

In stock

Add to cart

Product Overview

Ship worldwide

Kernom Ridge Overdrive with MIDI control

VOLUME Defines the overall output level of the pedal. At maximum, when the pedal is set to high voltage mode, output voltage can go up to 30V swing (+/-15V) to push your amp to its very limits. See page 11 for instructions to enter this mode.

POST TONE Acts after the clipping stage to precisely tailor the output sound, from fat and heavy to beautiful chime. 12’o clock is the most neutral position, depending on the chosen MOOD setting. Turn left for more low end, right for more presence.

PRE TONE Acts before the clipping stage to change the way the pedal reacts to the guitar signal. 12’o clock is the most neutral position, depending on the chosen MOOD setting. Turn left for more body, right for more sparkle.

DRIVE Controls the amount of drive in the signal. Varies depending on the selected MOOD setting. From clean to highly driven.

MID Shapes the midrange frequencies, allowing you to control how the guitar signal sits in or cuts through the mix. Just like with the PRE and POST TONE knobs, 12’o clock is the most neutral position, depending on the chosen MOOD setting. Adjust the MID response by turning left for a more scooped sound, right for a more cutting one.

MOOD Defines the clipping behavior of the pedal. From ultra high headroom soft clipping to very compressed hard clipping, and everything in between. Some settings are symmetrical, some asymmetrical. It controls the Analog Morphing Core engine inside the pedal, and is not a second drive knob: it gives its voice to the pedal and all the settings produce interesting results.

Specifications

True Bypass
Expression input
MIDI In/Out
1 Internal favorite preset
127 MIDI presets
30V output voltage swing capability
Premium input stage with sensitivity adjustment
Ultra low noise output
5mm thick touring ready casing
Input impedance: 1Meg Ohm (Guitar mode) / 32k Ohm (Line mode)
Output impedance: 100 Ohm
Bypass switching: True Bypass (electromechanical relay switching)
Dimensions: 11.2 cm deep x 16.4 cm wide x 5.2 cm tall (4.4 inches deep x 6.5 inches wide x 2 inches tall).
Weight: 850 g (1,8 lbs)
Use an adaptor (optional) with the following rating: 9VDC center negative, 250mA minimum, 300mA or more recommended

Specification

Manufacturer