Produktübersicht
Suhr Bella 1x12 Limited Edition 2020 Hand Wired 44/22W combo Amp
Features of the Suhr Bella amplifier:
Selectable Wattage
The Bella can be selected to run at either 44 or 22 watts. Choose 44 watts when you need the boldest tone with the most clean headroom. Choose 22 watts when you want the amp to break up sooner and at lower volumes.
Switchable Boost & Bright
TWO POSITION BOOST: This 2-position switch varies Bella’s input gain stage via the front panel or the footswitch (sold separately) jack located on the back of the amplifier. Engaging the boost provides +6dB of boost at the first gain stage.
THREE POSITION BRIGHT: The bright switch has three selections available.
In the down position: the Bright switch is out of the circuit.
In the middle position: Bella introduces a modest amount of brightness that brings out the guitar’s upper frequencies.
If you desire more organic chime, set Bella’s Bright switch to the up position. This position naturally opens up the top-end, allowing all of your guitar’s higher frequencies to shine through.
Transparent Effects Loop
Bella is equipped with a full-featured, all-tube series effects loop which performs equally well with pedals and line-level rack gear via the loop’s independent send and return controls. The effects loop was designed to be extremely clean and transparent, making it the ultimate effects platform.
Versatility on the Fly
The standard Bella has a single button foot switch (sold separately) available for the selectable boost. The Bella Reverb has a two button foot switch available to remotely switch the boost and reverb circuit.