Produktübersicht
Bob Smith Epoxy Quik-Cure Glue
Works Best On
- Hard Wood
- Glass and Metal
Works Well On
- Balsa Wood
- Soft Wood
- Fiberglass
- Ceramics
- Hard Plastics
- White Foam
- Reinforcing
Directions
Quik-Cure 5 min. Epoxy is an equal 2-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
Quik-Cure is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40˚F. Temperatures above 90˚F shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.
Quik-Cure bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces. Quik-Cure’s lack of brittleness allows it to form lasting bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured Quik-Cure™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.