Product Overview
Free shipping to any EU Country and ship Worldwide
14 days money-back guarantee
Specifications of the Strymon Iridium
Three amplifier models crafted using Matrix Modeling™, capturing the subtleties and unique tonal qualities of each amp
Round Amp – based on* a Fender® Deluxe Reverb®
Chime Amp – based on* the Brilliant channel of a Vox® AC30
Punch Amp – based on* a Marshall® Plexi (Super Lead model number 1959)
Nine Impulse Response speaker cabinets, 24bit / 96kHz 500ms
Stereo (three per amp type), pre-loaded with a curated set of IRs:
Deluxe Reverb 1×12″ by OwnHammer
Blues Junior® 1×12″ by CabIR
Vibrolux® 2×10″ by CabIR
AC30 2×12″AlNiCo by OwnHammer
1×12″ AlNiCo by Celestion®
Mesa® 4×12″ by Valhallir
GNR 4×12″ by OwnHammer
2×12″ Vintage 30 by Celestion
Marshall® 8×12″AlNiCo by CabIR
Load your own impulse responses using Strymon Impulse Manager software
Hybrid IR/algorithmic Room control with selectable small, medium, and
large rooms
Simple, responsive amp-style controls for Drive, Level, Bass, Middle,
and Treble
Premium stereo high impedance discrete JFET analog front end with
up to 22dB of pure analog gain
Stereo Input (requires TRS adapter cable)
Stereo Output
Operates at instrument and Line Level input sources
Discrete transistor headphone amplifier
Expression pedal input provides seamless morphing between knob positions (Expression mode), or smooth pre/post volume control with logarithmic taper (Volume mode)
USB jack for connecting to Strymon Impulse Manager software
to add and edit your own speaker cabinet IRs
Compatible with Strymon MultiSwitch Plus for remote selection of up to 4 presets
Full featured MIDI control accessible via EXP Jack for remote parameter control and access to 300 preset locations (requires Strymon MIDI EXP cable or MIDI to TRS interface)
Ultra-low noise, high performance 24-bit 96kHz A/D and D/A
converters provide uncompromising audio quality
Super high performance SHARC and ARM co-processors
32-bit floating point processing
Transparent Analog Buffered Bypass
Strong and lightweight anodized black aluminum chassis
9V DC power supply included
Power requirements: maximum 9 volts DC center-negative, with a minimum of 500mA of current
Dimensions:
4.5″ deep x 4″ wide x 1.75″ tall
11.4 cm deep x 10.2 cm wide x 4.4 cm tall
Designed and built in the USA
Three Iconic Amplifiers in the Strymon Iridium
Round Amp based on a Fender® Deluxe Reverb, Chime Amp based on the Brilliant channel of a Vox® AC30TB, Punch Amp based on a Marshall® Plexi (Super Lead model number 1959).
Nine Stunningly Realistic Cabs in Strymon Iridium
Iridium comes pre-loaded with a carefully curated collection of premium cabinet IRs from OwnHammer, Celestion, cabIR and Valhallir. You can also load your own IRs using Strymon Impulse Manager software.
Deluxe Reverb® 1×12″ by OwnHammer
Impulse of a vintage Fender® Deluxe Reverb 1×12″ open back combo with a 1978 Fender CTS ceramic 12″ speaker.
Blues Junior® 1×12″ by cabIR
Impulse of a 1×12″ Blues Junior cabinet with a Jensen® C12N speaker.
Vibrolux® 2×10″ by cabIR
Impulse of a 1965 Fender Vibrolux 2×10″ with Jensen C10NS speakers.
AC30 2×12″ AlNiCo by OwnHammer
Impulse of a Vox® AC30/6 open back 2×12″ combo with 2001 Celestion® T0530 Blue AlNiCo speakers.
1×12″ AlNiCo by Celestion
Impulse of a Celestion Blue AlNiCo speaker in a closed back 1×12″ cab.
Mesa® 4×12″ by Valhallir
Impulse of a 4×12″ Mesa Boogie halfback with two Celestion Black Shadow® MC-90 and two ElectroVoice® Black Shadow EVM12-L speakers.
GNR 4×12″ by OwnHammer
Impulse of a 1971 Marshall® 1960B “basketweave” 4×12″ cabinet with 1971 Celestion T1221 G12M-25 speakers.
2×12″ Vintage 30 by Celestion
Impulse of a Celestion Vintage 30 in an open back 2×12″ cab.
Marshall 8×12″ AlNiCo by cabIR
Impulse of a 1965 Marshall 8×12″ re-issue full stack cabinet, with Celestion T652 AlNiCo speakers.
Impulse Response Technology in Strymon Iridium
Impulse responses allow the sound and character of a mic’d speaker cabinet to be captured, so that any audio signal can be processed by the resulting impulse response and sound as if it’s being played through that exact speaker cabinet. Iridium is able to deliver impulse response resolution far greater than any other piece of outboard gear.
With full 24bit 96kHz resolution for the entire 500 milliseconds of its speaker cabinet impulse responses, Iridium is able to use the absolute highest quality IRs available. This means countless details are accurately preserved and reproduced to give you a completely real speaker response. Every cabinet resonance, speaker vibration, as well as reflections between the cabinet, the mic, the floor, and the ceiling; all the minuscule cues that tell our brain we are listening to our favorite cabinet are preserved, providing completely lifelike realism.
Load Own Impulses into Strymon Iridium
It’s easy to replace the pre-installed IRs with custom IRs from your own collection by using Strymon Impulse Manager software. To download the software or learn more, visit strymon.net/support/iridium.
Where Can I Use Strymon Iridium?
On Stage
Want to play live with the exact same tones that you use at home or in the studio? Or have access to multiple amp and cab setups without having to lug them on stage? Leave your amps at home, and connect Iridium directly to the house PA system.
Going direct eliminates the need to mic an amp, giving sound engineers the option to send your amp and cab tone directly to a wedge or in-ear monitors. Instant adjustments to your tone are right there on your pedalboard, only a footswitch away. With Iridium, there are no menus to wade through - just familiar, responsive amp-style controls for instant, easy adjustment.
In the Studio
Iridium provides gorgeous, iconic amp tones, stunningly realistic stereo cabinet impulse responses, and natural room ambience—essential elements for recording guitar in the studio.
Place Iridium at the end of your effects chain and capture stereo amp and cab tones direct into your recording interface. Or, place Iridium before your delays and reverbs to allow those time-based effects to occur post amp and cab.
Skip the hassle of miking up your amps or having to crank them up to get the tone you desire. Instantly audition amps and cabs with the flick of a switch.
At Home
You can’t always crank up an amplifier when you want to play in your living room or rehearse at home. Plug your favorite set of headphones into Iridium’s headphone jack and get immersed in the sounds of iconic amps and cabs in a natural sounding room.
Integrate Iridium into your pedalboard by placing at the end of your chain or before delays and reverbs, and experience your entire pedalboard tones directly in your headphones.
More Use Cases
Iridium also allows for less common use cases. Want to use Iridium’s amplifiers but not the IR cabinets? Select Iridium’s Cab Bypass mode, and connect the output(s) to the effects return or power amp input on a guitar amplifier.
Want to use Iridium’s IR cabinets but not the amps? Engage Iridium’s Amp Bypass mode, and connect a preamp or preamp pedal (such as Riverside) to Iridium’s input.
Because the purpose of Iridium is to generate amp and cabinet tones, the primary use case is for direct situations. It’s not recommended to connect Iridium to a guitar amplifier.